View Single Post
  #9  
Old 02-04-2018, 02:30 PM
astronwolf astronwolf is offline
Craftsman
 
Join Date: Mar 2013
Location: Northeast Ohio
Posts: 438
Default

Quote:
Originally Posted by mojo1986
The only hard part is the die-cut parts for the motor tubes, two sets of which I recently sold on Ebay. The tubes and nose cone should be easy to obtain from a number of vendors. And I think John Pursley sells a vinyl wrap set that makes finishing a breeze.

Pursley's Gemini-Titan wraps comes with a suggested parts list and basic instructions for cloing your own BT-70 or BT-80 based scale model. Tom Beach used Pursley's wraps and Shapeways parts created by Kevin Cespedes.

In addition to basic parts, the wraps cost about $30, and the Shapeways parts about $61 for the BT-70 size. BT-80 size parts are about $76.

http://www.accur8.com/Accur8_Order_Page.html
https://www.shapeways.com/marketpla...otix+and+gemini
__________________
-Wolfram v. Kiparski
NAR 28643
TRA 15520
MTMA Senior Advisor
Reply With Quote