Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Work Bench > 3D Printing Asylum
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #41  
Old 06-13-2019, 09:42 PM
ghrocketman's Avatar
ghrocketman ghrocketman is offline
President, MAYHEM AGITATORS, Inc.
 
Join Date: Jul 2005
Location: Michigan
Posts: 9,130
Default

To the best of my knowledge, the large Enerjet decal was only on one side.
__________________
When in doubt, WHACK the GAS and NEVER touch the brake !!!
No Harm=NO Foul advocate

If you are NOT FLYING LOW in the left lane, you need to GET THE #$&@ OUT of it !

Yes, there is such a thing as NORMAL
, if you have to ask, you probably aren't
!
Reply With Quote
  #42  
Old 06-14-2019, 11:14 AM
Jack Hydrazine Jack Hydrazine is offline
Junior Rocketeer
 
Join Date: May 2011
Posts: 23
Default

Looks great. Time for a flight!
Reply With Quote
  #43  
Old 06-14-2019, 07:56 PM
K'Tesh's Avatar
K'Tesh K'Tesh is offline
Seagulls Beware...
 
Join Date: Apr 2013
Location: Subject to Change
Posts: 873
Default

Quote:
Originally Posted by teflonrocketry1
Finished my 1340 clone with a 29mm motor mount. It has 3D printed nosecone, transition and fin-can, and homemade decals printed on a an inkjet printer, see picture.

Does anyone know if there were there decals on both sides of the rocket?

When my next shipment from eRockets arrives, I will get the original Enerjet decals I scored from eBay. I can't wait to scan them with a ruler to ensure the scaling is correct.
__________________
.
.

Dreaming of making the rockets I dreamed of as a kid (and then some).

"The Guide says there is an art to flying", said Ford, "or rather a knack."
"The knack lies in learning how to throw yourself at the ground and miss."


Launching is Optional... Landing? That Depends on Trees.

Last edited by K'Tesh : 06-14-2019 at 10:50 PM.
Reply With Quote
  #44  
Old 06-14-2019, 10:16 PM
teflonrocketry1's Avatar
teflonrocketry1 teflonrocketry1 is offline
Craftsman
 
Join Date: Aug 2007
Location: Whitehouse, Ohio
Posts: 197
Default

I just cleaned up these (http://plans.rocketshoppe.com/decals/Enerjet_Decals.tif) and printed them on clear water slide inkjet decal paper then used one nice coat of KRYLON Crystal Clear # 1303.
__________________
Bruce S. Levison, NAR #69055
Reply With Quote
  #45  
Old 06-14-2019, 11:53 PM
Jerry Irvine's Avatar
Jerry Irvine Jerry Irvine is offline
Freeform rocketry advocate.
 
Join Date: Jan 2008
Location: Claremont, CA "The intellectual capitol of the world."-WSJ
Posts: 3,589
Default

Quote:
Originally Posted by teflonrocketry1
I just cleaned up these (http://plans.rocketshoppe.com/decals/Enerjet_Decals.tif) and printed them on clear water slide inkjet decal paper then used one nice coat of KRYLON Crystal Clear # 1303.

Post the file?
__________________
Exemptions not regulations. Please support DOT treating slow burning solids as not subject to HMR. 2015 NAR President declines!
U.S. Rockets instaship. http://bit.ly/1aca7mA Please buy some rockets.
The O administration believed in tax, spend, borrow, fine, mandate, monologue. D voters will soon be very happy with the election outcome!
Model rocketry is as safe as safe can be defined in human existence. Bow and pray: GH Stine, Orville, Vern, Lee, Lonnie, Carl, etc. No, really.
Reply With Quote
  #46  
Old 06-16-2019, 09:40 PM
teflonrocketry1's Avatar
teflonrocketry1 teflonrocketry1 is offline
Craftsman
 
Join Date: Aug 2007
Location: Whitehouse, Ohio
Posts: 197
Default

The attached .jpg file is the Enerjet decal I cleaned up using Microsoft paint. I used a print from this file on my 1340 clone. Note this is a low resolution file created from the original .tif file which was made at 600dpi , some detail has been lost and the edges appear fuzzy.
Attached Thumbnails
Click image for larger version

Name:  Enerjet 1340 Decal.jpg
Views: 20
Size:  51.7 KB  
__________________
Bruce S. Levison, NAR #69055
Reply With Quote
  #47  
Old 06-19-2019, 11:33 PM
Jack Hydrazine Jack Hydrazine is offline
Junior Rocketeer
 
Join Date: May 2011
Posts: 23
Default

Is the STL file for the 1340 nose cone posted on Thingiverse? If not, could you post it? Thanks!

It looks to me like a 5:1 rounded ogive.
Reply With Quote
  #48  
Old 06-20-2019, 11:30 PM
teflonrocketry1's Avatar
teflonrocketry1 teflonrocketry1 is offline
Craftsman
 
Join Date: Aug 2007
Location: Whitehouse, Ohio
Posts: 197
Default

See attached .obj files for 1340 nose cone and coupler. I created these files with RockSim and 3D printed them using ABS and both parts both fit the LT-125 tubing that I have. If you need these files for Centuri ST-13 tubing or BT-55 just let me know.
Attached Files
File Type: obj 1340 CPLR LT125.obj (1.21 MB, 6 views)
File Type: obj 1340 NC For LT125.obj (1.07 MB, 6 views)
__________________
Bruce S. Levison, NAR #69055
Reply With Quote
  #49  
Old 06-21-2019, 11:41 AM
Jack Hydrazine Jack Hydrazine is offline
Junior Rocketeer
 
Join Date: May 2011
Posts: 23
Default

Thanks! I appreciate that greatly!
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 11:12 PM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe 1998-2019